Grass Edger from Lakeland – Product Review

Review by Michael Smith

Grass Edger – Lakeland Ref 50965 – 21.96 GBP

This Grass Edger sold by Lakeland comes as a 2-part tube steel construction that is assembled by means of a bolt with a wing nut. The assembly cause no problems whatsoever as it was all too obvious and the device appears to be quite sturdy.

The circular cutter of the Grass Edger is not over sharp – but is probably intended to be in is way – and the cutter assembly too looks fairly robust as well. Obviously, as will all things, the proof of the pudding, as they say, is in the eating, meaning here that only over a more prolonged use would one be able to gauge how it performs and holds up to the rigors that some may inflict it the tool.

The operation of the Grass Edger is straight forward and it cuts the edge very well, even rather matted grass, as was the case with the overgrown edges at my garden areas, some about a quarter of an inch thick. I know, shame on me for letting it get that way.

Over time, when one gets used to the way that this device works, this tool will be a definite improvement over the speed and accuracy of an ordinary Edging Iron, and even more so as to neatness.

The test that I subjected this Grass Edger to is and was probably rather unfair as it is hardly intended to cut the kind of heavy matted grass, the result of neglect. It must be said though that the tool performed well, even under those circumstances though I am a little concerned that this may have put some undue strain on the tool, strain that it would not encounter under normal conditions.
In all fairness, the edges that I was cutting with this manual Grass Edger for a test would have been a challenge even probably for a motorized cutter of this kind. Thus, I made hard work for the tool and for myself. No problem though, as the Grass Edger performed well throughout.

This Grass Edger from Lakeland is about 10 GBP cheaper than the cheapest similar tool that I have seen in Garden Centers and other garden catalogs, and such.

While the real reliability and sturdiness, as I have said, will only be found in time and use, as far as I can see this is a good tool at a fair price.

© M Smith (Veshengro), 2009
<>